Tsuruga Electric - Withstand Voltage and Insulation Tester, 8525
The model 8525 is an antomatic continuous tester of withstand voltage and insulation. High reliable test enabling proper test result management and analysis can be conducted with RS-232C output equipped as standard specification is tester.
Typical application in motor and generator, spark plugs, capacitors, connectors etc. aviation components, transformers, wire and cables, coils and chokes, switches and relays.
Characteristics
- Very good corresponding to various tests based on the safety standards of electrical appliance.
- Safety-oriented design : Interlock etc.
- Memory function having capable of storing 9 types.
- Available with status output which displays test conditions and test results.
- Large LED to display test conditions and measured values
- RS-232C for obtaining test condition and results.
Basic Specifications
| Measurement voltage | AC 0.2 to 5.00 kV |
|---|
| Voltage setting | Digital (setting resolution: 0.01 kV) |
|---|
| Waveform, Frequency | Sine wave, 50/60 Hz |
|---|
| Measurement current | From 0.01 mA to 20.00 mA |
|---|
| Setting time | 0.1 to 99.9 s, 100 to 999 s (with timer OFF function) |
|---|
| Measuring voltage | DC 25 V, 50 V, 100 V, 250 V, 500 V, and 1000 V, 6 ranges |
|---|
| Measurement range | 0.001 to 9990 MΩ |
|---|
| Setting time | 0.2 to 99.9 s (with timer OFF function) |
|---|
| Mask time | 0.1 to 99.9 s (Mask time < Setting time) |
|---|
| Interface | Remote I/O, RS-232C, USB |
|---|
| Power supply | 90 to 250 V AC, 50/60 HZ |
|---|
| Weight | Approx. 10 kg |
|---|
| Dimensions | 310 (W) x 150 (H) x 380 (D) mm |
|---|
| Accessories | 2 m High-voltage cable, 3 m Earth wire, 2.5 m Power cord, Remote I/O plug, Fuse |
|---|
