Heating oil pump: Peripheral pump is driven by a robust motor provided with an excess temperature cut-out. The upper safety pressure limit in accordance with DIN/EN 12514-1 is reached by means of a micro limit switch which is interlocked with the controller. A reset may only be carried out by a specialist, the reason for the safety switch-off has to be examined.
Filter: Situated in the suction plant stub, can be removed for cleaning.
Non-return valve: Situated in the pressure connection stub on the pressure vessel.
Pressure vessel: Of aluminium construction. Inside is a rolling membrane made of special rubber with fabric reinforcement (operating pressure up to 7 bar) and a piston with which the pump pressure is determined. The indicator button shows contents of the vessel at any one time. The safety and operating switches with silver contacts are thoroughly fastened on the pressure vessel and provided with a plug connector.
Technical Data | |
---|---|
Pumped volume: | 30 l/h |
Pressure height: | 16 m |
Suction height: | 4 m |
Operating pressure: | 2.5 bar |
Suction-/Pressure pipe: | 8 mm Pipe-Ø |
Motor: | 220V 50 Hz, maintenance fee |
Protection: | DIN 40050 T.1 |
Length: | 400 mm |
Width, height: | 200 mm |
Weight: | 6.5 kg |