Special Rope with steel-reinforced fiber core for elevators

For many years our elevator rope works standard PAWO F3 has a proven history in many types of traction elevator applications. The outer strands are designed in Seale construction. The 9 thicker wires of the outer strand layer offer a higher wear resistance.

The rope is primarily used where the service life is more defined by wear due to contact with the traction sheave than by rope fatigue due to bending. Deformations of the rope cross-section can be greatly reduced. The fiber content in the core of the steel wire rope works as a lubricant reservoir.

Properties

• low and mid-rise
• small to intermediate number of bending cycles
• normal to heavy usage levels
• wear-resistant
• low elongation
• extended service life

Technical Data

• Construction: 8 x 19 Warrington with steel wire rope core, regular lay,
• technical terms of delivery to DIN EN 12385, ISO 4344
• Load-bearing wires in the outer strands: 152 Tensile grade 1570 N/mm², steel wire bright or galvanized