The safety photo eye is used for entrapment protection on industrial doors, mainly for rolling grills. An interruption of the light beam initiates a signal between emitter and receiver which interrupts the movement of the power operated door.
The pull-in protection RAYTECTOR is suitable for absolute fitting dimensions between 1.5 m to 10 m.
Emitter and receiver are inserted in compound-filled plastic housings. The respective 10.5 m length of the connector cables allow the direct connection to the control unit.
Features
Compatible with OPTOEDGE safety edge
Front-side indicator LED
Mounting angle for easy adjustment
Operating range 1.5 m – 10 m
10.5 m connection cable
Protection class IP68
Class 2 Photo Eye acc. IEC 61496-2
Applications
Rolling doors – pull-in protection
Technical Data
Interface
3-Wire OSE
Operation Range
1.5 ... 10 m (4.9 ... 32.8 ft)
Supply Voltage
5 ... 28 VDC
Certification
EN 12978
Mounting
Mounting hole
Connection cable
10.5 m (34 ft)
Protection class
IP54
Operation temperature
-20 ... +55 °C (-4 ... +131 °F)
Power consumption
60 mA max.
Response Time
32 ms
Housing Material
ABS black
Aperture Angle
Tx/Rx ≤ ±5°
Safety properties
Safety Category 3, PL c (combined with OSE-C 2323/2324)
-300x300.png "CEDES - Elevators & Escalators, Light barriers, RAYTECTOR RAY-S (pull-in protection)")
