The Codix 544 is a voltage-powered multifunction counter with3 functions in one device: pulse, position, frequency and speed display, timer and short time meter for fast and slow count pulses. With 6-digit LED display for NPN, PNP input signals.
Powerful
Fast count and frequency input – input frequency max. 60 kHz
Robust housing – IP65 protected
Very bright LED display, 14 mm high, 6 digits
Very accurate precise frequency measurement principle (HRA-High Rate Accuracy System) Frequencies up to 38 Hz are calculated using time-interval (period duration) measurement. Frequencies > 38 Hz are calculated using a special time base (gate time) measurement. A very high accuracy of < 0.1% is achieved, even with very short gate times. The resulting measurement is available after a max. of 50 ms.
Short start-up time – detects input pulses just 16 msec after being switched on => no pulses are lost with a simultaneous motor start-up
User-friendly and universal
Large keys – can also be operated when wearing gloves
Programming:
- Simple uniform menu-driven programming and operation
- Possible to enter the programming also during operation with a confirmation prompt
Individually programmable scaling:
multiplication and division factor (0.0001…99.9999), to display corresponding engineering units, e.g. position in 1/10 mm and speed in RPM
4 different count input modes:
2-channel count input for detecting count direction, difference or adding mode, quadrature with x1, x2 or x4 evaluation
Frequency measurement: display in 1/min or 1/sec
Time counting: pulse width or time interval measurement in hours, minutes or seconds, as well as real-time display
AC or DC power supply
Inputs: as an alternative to the HTL inputs, devices are available with a 5 V DC input level, for use as parallel displays to PLCs
Optional output: zero signal for position and count, zero speed monitoring, 1 Hz clock pulse for active time measurement
