Position switch / medium heavy Position switch / Universal range U - Metal enclosure / U 432 / U 432 Offset roller lever K

• Metal enclosure
• 2 Contacts
• 62 mm x 80 mm x 50 mm (basic component)
• Switching points and contact function adjustable
• 3 cable entries M 20 x 1.5
• Actuator heads can be repositioned by 4 x 90°

Ordering details
Product type description UK 432Y
Article number 101166388
EAN code 4030661214597

Standards EN 60947-5-1
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N) No
Standard housing (Y/N) No
Materials
- Material of the housings light alloy die-casting
- Roller material Plastic
- Material of the contacts Silver
Housing coating painted
Weight 340 g
Slide form Castor

Mechanical data
Design of electrical connection Screw connection
Cable section
- Min. Cable section 1.5 mm²
- Max. Cable section 2.5 mm²
AWG-Number 13
Active principle mechanical
Mechanical life 10.000.000 operations
Contact life 2.000.000 operations, at 6 A / 400 V, cos φ = 0,4
Design of actuating element Offset roller lever
Contact opening 2 x 1.5 mm
Actuating speed with vertical actuating angle to switch axis
- Min. Actuating speed 1 mm/min
- Max. Actuating speed 0,5 m/s
- Actuating angle from left of switch axis 45°
- Actuating angle from right of switch axis 30°
notice All indications about the cable section are including the conductor ferrules.

Ambient conditions
Ambient temperature
- Min. environmental temperature −20 °C
- Max. environmental temperature +60 °C
Protection class IP65 to IEC/EN 60529

Electrical data
Design of control element Opener (NC)
Switching principle Creep circuit element
Number of shutters 0 piece
Number of openers 2 piece
Rated insulation voltage Ui 500 V
Thermal test current Ithe 16 A
Max. fuse rating 16 A gG D-fuse

Dimensions
Dimensions of the sensor
- Width of sensor 62 mm
- Height of sensor 118 mm
- Length of sensor 50 mm
Roller wide 8.5 mm
Roller diameter 20 mm

notice
Type of contact and switching points can be factory set to order.
notice Actuation from the right should be avoided, since this reduces the mechanical life of the position switch.