Central Kagaku MLSS Meter, ML-54

Brand: Central Kagaku
Model No: ML-54

$0.00

The ML-54 MLSS meter is a portable sludge concentration meter that performs measurements of transmitted light to make simple on-site measurements of the concentration of activated sludge in sewage, waste, purification tanks and plant wastewater treatment systems and of sludge zone in nitrification and sedimentation tanks.

Features:
1. Sludge concentration and water depth can be measured simultaneously.
2. Automatic zero calibration functionality.
3. Extensive calculation functionality.
4. Sludge zone level detection (alarm on detection). Input the sludge zone concentration as a transmissivity percentage to obtain an alarm on reaching the sludge interface.
5. Low-battery-voltage warning display.
6. Automatic shutdown functionality for neglect to turn power off.
Power turns off automatically ten minutes after end of use (time to shutdown may be set by user).
7. Connect to printer (optional) to print measurement readings.

Specifications:

Measurement method:	transmitted light
Measurement range:	sludge density: 0-15000 mg/L water depth: 0-15m (10m standard cable) sludge zone: 10000mg/ L or more
Reproducibility:	Sludge density: readout ±3% Water depth: ±0.1m
Readouts	Concentration: LCD, 5 digits, 1 mg/L minimum Water depth: LCD, 3 digits, 0.1m minimum
Light source	LED
Sensor	Silicon photocell
calculations	JIS conversion, Y=aX+b Sludge volume index, SVI=SV% MILSS% Sludge return rate, r=SVI x MLSS% [100-(SVI x MLSS%)] Span, X=A x C/B Auto-zero
Specimen memory	1-99 specimens
Error messages	Zero alignment failure, print failure, low battery voltage, EEPROM error
Power source	Nickel-hydrogen batteries (4 cells) Automatic shutdown functionality
Uptime	20 hours continuous use